Onyfix Primer - Refrigerate for the longest durability

Sku: 158012
The Pantented medical brace technique with MEDICAL DEVICE classification. TIP: Distribute primer with a lint-free cotton swab - remember to comre out in all corners. Let air dry and give 20 sec. light with onylux lamp. When the primer has air-dried and received UV light, any exscess primer can be wiped off with the other dry side of cotton swabs. NB: Always remember that the primer must be applied in a very thin layer and be completely dry before the onyfix mass is applied. 
The Onyfix® nail correction system is a versatile, innovative product for the painless treatment of ingrown and rolled nails (unguis incarnatus). The Onyfix® nail correction system can be used to treat almost all types of ingrown or deformed nails. The process consists of Onyfix® Primer, which acts as a binder, Onyfix® Soft and Onyfix® Hard Composite. APPLICATION OF PRIMER: Clean and degrease the affected nail carefully. Onyfix Primer is applied to the tip of a cotton swab and applied to the nail in a thin and even layer. The product acts as an adhesive for the nail correction mass. Do not touch the treated surface. For better durability, the blue LED lamp is used for approx. 20 seconds. Place a drop of Onyfix® Primer in the lid of the Onyfix® primer bottle or a small bowl. Moisten a cotton swab with Onyfix® Primer. Do not use too much as this may cause the mass to slip around the nail. Place the swab in the middle of the nail and apply Onyfix® Primer evenly on the nail. Make sure that Onyfix® Primer is not applied to nails or cuticles. Depending on the room temperature, the primer requires approx. 5 minutes to dry. The primer must be completely dry on the nail. 5 ml Watch video for further explanation and review of the process.